CN
Home > Products > Motion Control > Motorized Linear Stages > TSAxx-C series slim motorized linear stages

TSAxx-C

TSAxx-C series slim motorized linear stages

The key parts of TSA-C series slim motorized linear stages include grinding ball screws, cross-roller guides and high-quality shaft coupling. 
 
 
Inquiry
Download
Details
Description:
The key parts of TSA-C series slim motorized linear stages include grinding ball screws, cross-roller guides and high-quality shaft coupling. This configuration ensure that high performance of this series products is available for customers. A pair of mechanical position-limit switch and origin-point sensor are all necessary parts to guarantee stages working well. It is easy for signal communications due to standard electrical and mechanical interfaces being used. Customers can operate the stages manually by using a handwheel attached to the motor. This series of products offers standard installation holes which ensure the easy setup for multi-axis stages system. It also makes the combination with Zolix other products much easier. Height of table surface is 30mm and highest of point of stages is just over 44mm from installation surface. These specifications provide enough possibility to use this series product in those high-precision and high-solution motion required but limited-height-space scenarios. The characteristic of self-lock of grinding screws benefits the usage of this kind of products as Z-axis
Main characteristics:
Grinding screws (1mm lead pitch) and standardtwo-phase stepping motors offer higher performance-to-cost ratio
Higher loading capability contributed by cross-roller guides used
Compact design offers slim table surface and other small mechanical dimensions
Mechanical position-limit switch and sensor benefit operation safety and easy maintenance
Naming rules:
Selection chart:
 

Model number

TSA30-C

TSA50-C

Mechanical specifications

Travel range(mm)

30

50

Table dimensions(mm)

90×90

90×110

Transmission mechanism

Grinding screwsΦ8×1

Guides (guiding mechanism)

Cross-roller guides

Main body materials and surface treatments

Black anodic-oxidation aluminum-alloy

Weight (Kg)

1.3

1.4

Accuracy specifications

Resolution (step/half-step) (μm)

5/2.5

8-fine-subdivision resolution (μm)

0.625

Highest speed (mm/s) *

10

Repositioning accuracy (μm)

≤±5

Backlash clearance (μm)

≤7

Electrical specifications

Motor and its stepping angle (°)

Two-phase 42 stepping motor, 1.8

Working current (A)

1.7

Torque of motor (N·m)

0.42

Position-limit sensors (built-in)

2*KX-EE-SX672

Origin-point sensors (built-in)

1*PI-ITR8104

Operating load

Horizontal direction (Kg)

10

Vertical direction (Kg)

5

Invert direction (Kg)

3